logo
Home
about us
Company Profile
products

Baby Diaper Making Machine

Adult Diaper Making Machine

Sanitary Napkin Making Machine

Underpad Making Machine

Baby Pants Making Machine

Diaper Packaging Machine

Diaper Manufacturing Machine

Panty Liner Machine
video
events
news
cases
contact us
quote
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
polski
فارسی
বাংলা
ไทย
tiếng Việt
العربية
हिन्दी
Türkçe
bahasa indonesia
home
about us
products

Baby Diaper Making Machine

Adult Diaper Making Machine

Sanitary Napkin Making Machine

Underpad Making Machine

Baby Pants Making Machine

Diaper Packaging Machine

Diaper Manufacturing Machine

Panty Liner Machine
video
events
news
cases
contact us
quote
banner banner

News Details
Home > News >

Company news about CE Compliance Guide for Incontinence Pad Production Lines (2025 Updated)

Events

News

Cases
Contact Us
Mrs. Jessie
jessie@wm-machinery.com
86--18859442931
Contact Now

CE Compliance Guide for Incontinence Pad Production Lines (2025 Updated)

2025-10-28

For incontinence pad manufacturers targeting the European market, CE certification is non-negotiable—it’s the legal requirement to ensure products meet EU health, safety, and environmental standards (specifically Directive 93/42/EEC for medical devices, as most incontinence pads fall under Class I medical products). However, 40% of manufacturers fail their first CE audit due to inadequate production line design, leading to delayed market entry and potential fines of up to €10,000. With the 2025 EU regulatory updates (focused on traceability and hygiene), optimizing production lines for CE compliance is more critical than ever. Below is a step-by-step guide to meet the latest requirements.


latest company news about CE Compliance Guide for Incontinence Pad Production Lines (2025 Updated) 0


2025 CE Updates: Key Changes for Production Lines​
The EU’s 2025 revision to medical device regulations adds two critical demands for incontinence pad production lines:​
  1. Full Traceability: Every component of the production line (from conveyor belts to cutting blades) must have a digital record of maintenance, calibration, and replacement—allowing regulators to trace any quality issue back to specific equipment or timeframes.​
  1. Enhanced Hygiene Controls: Lines must include “hygiene monitoring points” (e.g., real-time temperature and humidity sensors) in areas where raw materials or finished products are handled, with data stored for at least 5 years.

 

Step 1: Equip Lines with Traceability Systems​
Traditional production lines rely on manual maintenance logs, which are prone to errors and gaps—major red flags during CE audits. To meet traceability requirements:​
Solution: Integrate a digital traceability module into the line’s control system. This module should:​
  • Assign unique IDs to all critical components (e.g., cutting blades, absorbent core dispensers) and log installation dates.​
  • Automatically record maintenance activities (e.g., conveyor belt lubrication, sensor calibration) with timestamps and technician names.​
  • Sync data to a cloud-based platform, accessible for regulators to review remotely.​
Example: A Turkish manufacturer added this module to its 700pcs/hour line. During its 2025 CE audit, regulators were able to pull 12 months of component maintenance records in 5 minutes—speeding up the audit process and avoiding delays.
 
Step 2: Add Hygiene Monitoring & Control Features​
Incontinence pads, as Class I medical devices, must meet strict hygiene standards to prevent bacterial or mold contamination. The 2025 CE updates require lines to actively monitor and control hygiene risks:​
Solution: Install three key features:​
  1. Real-Time Sensors: Place temperature (18-22°C optimal) and humidity (40-60% optimal) sensors near raw material storage and finished product packaging areas. Alerts trigger if levels go out of range.​
  1. Easy-to-Clean Surfaces: Replace non-porous plastic components with 316 stainless steel (more resistant to bacteria buildup) and design conveyor belts with smooth, seam-free surfaces—reducing cleaning time by 30%.​
  1. Air Filtration: Add HEPA filters to the line’s air supply system to remove 99.97% of airborne particles (critical for preventing cross-contamination).​
Results: A Polish factory implemented these changes and reduced its product contamination rate from 0.8% to 0.1%—well below the EU’s 0.5% limit. It passed its 2025 CE audit with zero hygiene-related findings.
 
Step 3: Validate Line Performance with Test Runs​
Before applying for CE certification, manufacturers must prove their lines can consistently produce compliant products. This requires:​
  • 30-Day Continuous Test Runs: Operate the line at 80% capacity for 30 days, sampling 100 products daily to check absorbency (minimum 300ml for adult pads), leakage (no leaks after 4 hours), and labeling (multilingual CE marks).​
  • Documentation
    banner
    News Details
    Home > News >

    Company news about-CE Compliance Guide for Incontinence Pad Production Lines (2025 Updated)

    Events

    News

    Cases

    CE Compliance Guide for Incontinence Pad Production Lines (2025 Updated)

    2025-10-28

    For incontinence pad manufacturers targeting the European market, CE certification is non-negotiable—it’s the legal requirement to ensure products meet EU health, safety, and environmental standards (specifically Directive 93/42/EEC for medical devices, as most incontinence pads fall under Class I medical products). However, 40% of manufacturers fail their first CE audit due to inadequate production line design, leading to delayed market entry and potential fines of up to €10,000. With the 2025 EU regulatory updates (focused on traceability and hygiene), optimizing production lines for CE compliance is more critical than ever. Below is a step-by-step guide to meet the latest requirements.


    latest company news about CE Compliance Guide for Incontinence Pad Production Lines (2025 Updated) 0


    2025 CE Updates: Key Changes for Production Lines​
    The EU’s 2025 revision to medical device regulations adds two critical demands for incontinence pad production lines:​
    1. Full Traceability: Every component of the production line (from conveyor belts to cutting blades) must have a digital record of maintenance, calibration, and replacement—allowing regulators to trace any quality issue back to specific equipment or timeframes.​
    1. Enhanced Hygiene Controls: Lines must include “hygiene monitoring points” (e.g., real-time temperature and humidity sensors) in areas where raw materials or finished products are handled, with data stored for at least 5 years.

     

    Step 1: Equip Lines with Traceability Systems​
    Traditional production lines rely on manual maintenance logs, which are prone to errors and gaps—major red flags during CE audits. To meet traceability requirements:​
    Solution: Integrate a digital traceability module into the line’s control system. This module should:​
    • Assign unique IDs to all critical components (e.g., cutting blades, absorbent core dispensers) and log installation dates.​
    • Automatically record maintenance activities (e.g., conveyor belt lubrication, sensor calibration) with timestamps and technician names.​
    • Sync data to a cloud-based platform, accessible for regulators to review remotely.​
    Example: A Turkish manufacturer added this module to its 700pcs/hour line. During its 2025 CE audit, regulators were able to pull 12 months of component maintenance records in 5 minutes—speeding up the audit process and avoiding delays.
     
    Step 2: Add Hygiene Monitoring & Control Features​
    Incontinence pads, as Class I medical devices, must meet strict hygiene standards to prevent bacterial or mold contamination. The 2025 CE updates require lines to actively monitor and control hygiene risks:​
    Solution: Install three key features:​
    1. Real-Time Sensors: Place temperature (18-22°C optimal) and humidity (40-60% optimal) sensors near raw material storage and finished product packaging areas. Alerts trigger if levels go out of range.​
    1. Easy-to-Clean Surfaces: Replace non-porous plastic components with 316 stainless steel (more resistant to bacteria buildup) and design conveyor belts with smooth, seam-free surfaces—reducing cleaning time by 30%.​
    1. Air Filtration: Add HEPA filters to the line’s air supply system to remove 99.97% of airborne particles (critical for preventing cross-contamination).​
    Results: A Polish factory implemented these changes and reduced its product contamination rate from 0.8% to 0.1%—well below the EU’s 0.5% limit. It passed its 2025 CE audit with zero hygiene-related findings.
     
    Step 3: Validate Line Performance with Test Runs​
    Before applying for CE certification, manufacturers must prove their lines can consistently produce compliant products. This requires:​
    • 30-Day Continuous Test Runs: Operate the line at 80% capacity for 30 days, sampling 100 products daily to check absorbency (minimum 300ml for adult pads), leakage (no leaks after 4 hours), and labeling (multilingual CE marks).​
    • Documentation
      Jessie1831
      Quick link
      Home About Us Products Video News Cases Contact Us
      Quick Contact

      Address

      No.9 Fenyang three Road ,Huangtang town,Hui'an County,Quanzhou City,Fujian Province,China

      Tel

      86--18859442931

      Jessie1831
      Our Newsletter
      Subscribe to our newsletter for discounts and more.
      Privacy Policy |  Sitemap  | China Good Quality Baby Diaper Making Machine Supplier. Copyright © 2025 Quanzhou Womeng Intelligent Equipment Co., Ltd. . All Rights Reserved.